BCI Mechanical, Inc. is celebrating 36 years as your neighborhood service team.
Your Neighborhood Service Team
400 E. Oak Street  •  Denton, TX 76201
400 E. Oak Street
Denton, TX 76201

Maintenance Checklist

Maintenance Checklist

Maintain your equipment to prevent future problems and unwanted costs. Keep your cooling and heating system at peak performance by having a contractor do annual pre-season check-ups. Contractors get busy once summer and winter come, so it's best to check the cooling system in the spring and the heating system in the fall. To remember, you might plan the check-ups around the time changes in the spring and fall.

A typical maintenance check-up should include the following.

  • Check thermostat settings
    to ensure the cooling and heating system keeps you comfortable when you are home and saves energy while you are away.

  • Tighten all electrical connections
    and measure voltage and current on motors. Faulty electrical connections can cause unsafe operation of your system and reduce the life of major components.

  • Lubricate all moving parts.
    Parts that lack lubrication cause friction in motors and increases the amount of electricity you use.

  • Check and inspect the condensate drain
    in your central air conditioner, furnace and/or heat pump (when in cooling mode). A plugged drain can cause water damage in the house and affect indoor humidity levels.

  • Check controls of the system
    to ensure proper and safe operation. Check the starting cycle of the equipment to assure the system starts, operates, and shuts off properly.

Cooling Specific

  • Clean evaporator and condenser air conditioning coils
    Dirty coils reduce the system's ability to cool your home and cause the system to run longer, increasing energy costs and reducing the life of the equipment.

  • Check your central air conditioner's refrigerant level
    and adjust if necessary. Too much or too little refrigerant will make your system less efficient increasing energy costs and reducing the life of the equipment.

  • Clean and adjust blower components to provide proper system airflow for greater comfort levels
    Airflow problems can reduce your system's efficiency by up to 15 percent.

Heating Specific

  • Check all gas (or oil) connections, gas pressure, burner combustion and heat exchanger
    Improperly operating gas (or oil) connections are a fire hazard and can contribute to health problems. A dirty burner or cracked heat exchanger causes improper burner operation. Either can cause the equipment to operate less safely and efficiently.

Actions to Do Yourself

  • Inspect, clean, or change air filters
    once a month in your central air conditioner, furnace, and/or heat pump. Your contractor can show you how to do this. A dirty filter can increase energy costs and damage your equipment, leading to early failure.


EnergyStar - U.S. Environmental Protection Agency - U.S. Department of Energy

Allow BCI Mechanical, Inc. to repair your Plumbing in Argyle TX
24/7 Emergency Service  • 
Call Us Today  • 
(940) 565-1010
 
Send Us a Message
 
Enter a valid email address.
$
 





 
Contact Information
 
BCI Mechanical, Inc.
   400 E Oak St  •  Denton, TX 76201
   Monday - Friday  |  7:30am - 5:00pm  •  24/7 Emergency Service
   Monday - Friday  |  7:30am - 5:00pm
   Monday - Friday  |  7:30am - 5:00pm
Connect With Us:
Like us on facebook for more info on our  repair service in
For  repair service in , find us on Google!
Email us any questions about our  repair service in
For the best  replacement in , choose a BBB rated company.
Home   |   Email Us   |   Schedule Service   |   Maintenance   |   Warranty   |   Employment   |   Reviews   |   Search Site
Home   |   Email Us   |   Schedule Service
Maintenance   |   Warranty
Employment   |   Reviews   |   Search Site